Optical Test Equipment

EG&G Parc Model 194A Variable Frequency Light Chopper

$100.00

EG&G Parc Model 194A Variable Frequency Light Chopper
Good Condition
Check BMI Stock for More Items
***65031***

Add to cart

Aerotech GS606 Controller

$450.00

Aerotech DR600 GS606 Controller
Good Condition
Check BMI Stock for More Items
***65108***

Add to cart

Kollmorgen Graduated Borescope Probe, no Ocular

Kollmorgen Borescope, (Electro-Optical Division). Borescope, Measuring Long Probe, Serial number 387.

Rigid probe housing, with right-angle mounted prism in probe tip (side window). Overall length of probe body is 550mm (21 5/8 inches). Distal end of probe is 0.370 inches (for 7.750 inches � steps up to .875 inches in diameter (that portion is 13 inches long, with a conical connection between the two diameters. Large diameter is graduated in inches, with divisions every 0.100 inch.

Right-angle viewing with illumination via fiber optics. Fiber optic armor-clad, with illumination centering puck on distal end. Active bundle diameter is 0.162 inches. Length of fiber optic lead is approximately six feet. Diameter of adapter at fiber bundle end is 1.560 inches.

Magnification adjustment ring marked �magnification factor�, graduated from 1 to 8.5 (with 10 divisions between numbers). Changing this setting seemed not so much to change the magnification but the focus point of the borescope. The borescope is missing the ocular (captive threaded ring is present, but the ocular is missing). Using an ocular from another instrument I determined that the closest focus point is about 4.5 inches away from the side mirror, and by adjusting the ring, I was able to focus to infinity. Therefore this instrument is for looking into cavities � you cannot focus on the wall of a bore that isn�t much larger than the diameter of the probe.

There are two articulating right-angle joints that can be set at any angle and clamped in order to avail oneself of the most comfortable viewing position. There is no ocular included with this instrument.
***MPN
***OEM Kollmorgen
***SKU*** 904

Agilent 8169A Polarization Controller

$5,000.00

Unit is a Agilent 8169A polarization controller with opt 022, angled contract connectors. The cable shown has two optical module connectors.

Manufactures description
The 8169A Polarization Controller, with single-mode fiber input and output, is used to change light from any polarized or unpolarized light source into any well-defined state of polarization. The design based on bulk-optic zero-order waveplates and a high-performance linear polarizer at the input provides optimum determination and repeatability of polarization states over a wide wavelength range. The 8169A is especially well suited for use together with a tunable laser to make swept-wavelength measurements of the polarization dependence of fiberoptic devices, by setting a set of relatively orthogonal polarization states for Mueller Matrix analysis. These measurements are supported by a Plug&Play driver and coordinated operation of the 8169A with an Agilent tunable laser and power meters can be enhanced with the Photonic Foundations Library software package. The fundamental basis of this flexible instrument also supports many general applications requiring polarization control and analysis.

Features:
-Accurate polarization control based on mechanical position of zero-order waveplates.
-Built-in algorithms for controlled polarization scanning.
-High accuracy and repeatability of output polarization state: +/-0.09� on Poincar� Sphere
-Low wavelength dependence of output polarization state: +/- 0.1�/nm on Poincar� Sphere
-Accepts high input power levels and polarized or unpolarized light sources.
-Flexible attachment with interchangeable Agilent connector adapters..

Benefits:
Highly accurate and repeatable output polarization state reduces time for calibration of the test setup and minimizes test uncertainties.
The low wavelength dependent movement of output polarization empowers high speed, swept wavelength measurements as well as broadband applications.
The built-in auto-scanning capability allows fast characterization across polarization states

BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping, Handling fees depend on your location. We will provide a freight quote to meet your
individual needs and work with you if you prefer to use your own
carrier.

***MPN 8169A
***OEM Agilent Technologies
***SKU*** 37599

Add to cart

Fiber Control Ind.RCPS-600 Resonant-Coil Polarization Scrambler

$1,800.00

This is a Fiber Control Industries RCPS-600 Resonant-Coil Polarization Scrambler.

This unit came from a working environment but has not been tested, please call for more information

Features:
User friendly bench top unit
Fully licensed
Broad range of modulation frequencies
Connectorized input/output
Low back-reflection
Low insertion loss

Manufacturer Specifications: (optical, line power, physical)

Optical input/output connectors FC/UPC or FC/APC (Molex�)
Minimum Degree-of-Polarization @ 600 kHz < 2% (typical)
Insertion-loss 60 dB (with FC/UPC or FC/APC)

Electrical input connector BNC Connector (AMP�)
Modulation Rate* (nominal) 600 kHz, 600 kHz – 1 MHz
Modulation Signal Waveform Sine
Modulation Voltage, 50 @ 600 kHz < 20 Vpp
Resonant Coil Material Piezoelectric Ceramic (PZT)
Physical dimensions 7x19x26 cm (2 3/4 x 7 1/2 x 10 1/4).

BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Optical Test Equipment for sale.
We will work with you individually to find the perfect set up for your application.

Shop our Optical Tables for the most competitive optical table price.
Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!

BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.

**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!

Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN RCPS-600
***OEM Fiber Control Industries
***SKU*** 37814

Add to cart

Femtochrome Research FR-103XL Rapid Scanning Autocorrelator Crosscorrelator

$4,900.00

Femtochrome Research FR-103XL Rapid Scanning Autocorrelator Crosscorrelator Instrument

Femtochrome Research FR-103XL Rapid Scanning Autocorrelator/Crosscorrelator instrument

Datasheet::
http://www.femtochrome.com/Datasheets/FR-103XL%20Datasheet.pdf

The FR-103XL is for autocorrelation crosscorrelation measurement for monitoring the pulse width of ultrashort optical bursts using a dispersion free method. Offering unsurpassed sensitivity and resolution, Compact and easy to operate. The FR-103XL measures weak signals in optical telecommunications, as well as pulses from other mode-locked lasers such as Ti-Sapphire.

Options::
-Custom BBO for 1060nm
-NO Fiber Adapter
-NO Fiber Coupler
-NO Computer Data Aquisition
-NO VGA Display
-NO Wide Scan.
-120ps Scan Delay.
***
***MPN FR-103XL
***OEM Femtochrome Research Inc
***SKU*** 63979

Add to cart

Thorlabs PA530 Polarimeter

$950.00

Thorlabs PA530 Polarimeter.

1100-1600nm
***MPN PA530
***OEM Thorlabs
***SKU*** 64397

Add to cart

Thorlabs Polarimeter Data Console w/ Optical Head

$4,700.00

Thorlabs Polarimeter Data Console includes PA530 Optical Head
***MPN PA530
***OEM Thorlabs
***SKU*** 64332

Add to cart

20″ Integrating Sphere

$500.00

20″ Integrating Sphere
***MPN
***OEM Brand Unmarked
***SKU*** 63259

Add to cart

Integrating Sphere

$6,900.00

Integrating Sphere.

30″ Inside Dia
33.5″ Outside Dia
34.5″ Outside Dia including Gasket..

***MPN
***OEM Brand Unmarked
***SKU*** 62381

Add to cart

Labsphere Integrating Sphere

$8,900.00

Labsphere Integrating Sphere.

ID: 39″
OD: 40″
No Dents
Coating is in great shape
Comes with Stand
***MPN
***OEM
***SKU*** 62684

Add to cart

NRC SR-D SuperCavity Controller with NRC SuperCavity SR-D Controller

$700.00

NRC SR-D SuperCavity Controller with NRC SuperCavity SR-D Controller

Power cord not included
Unit is has not been tested
***MPN SR-D
***OEM Newport Research Corp (NRC)
***SKU*** 62642

Add to cart

Rolyn Arcadia Graduted Optical measuring Device

$100.00

Rolyn Arcadia Graduated Optical Measuring Device
***MPN
***OEM Rolyn Optics Co
***SKU*** 57731

Add to cart

Thorlabs PM100 Optical Power Meter w/ TH30W Head and Power Supply

$660.00

Thorlabs PM100 Optical Power Meter w/ TH30W Head and Power Supply

Unit powers on. Battery pack charges. Unit checked O.K. with test laser source.
Condition : Good..
***MPN PM100 TH30W
***OEM Thorlabs
***SKU*** 61495

Add to cart

Scanning Slit Beam Profiler BeamR2 BeamMap2 by Data Ray Inc

$600.00

Scanning Slit Beam Profiler BeamR2 BeamMap2 by Data Ray Inc
Si detector 190 to 1150 nm
Powered by USB port.
Software sees unit and spins motor but does not acquire data.
.
***MPN R2
***OEM DataRay
***SKU*** 61609

Add to cart

Optical Shear Plate 20 mm CT-20 Ocean Optics for Collimation Alignment

$400.00

Optical Shear Plate 20 mm CT-20 Ocean Optics
for Collimation Alignment
20 mm aperture
optic looks quite good
***MPN CT-20
***OEM Ocean Optics
***SKU*** 61606

Add to cart