-
$500.00
Sanyo Denki M818T-031 DC Servo Motor
Excellent Condition
Check BMI Stock for More Items
***73259***
-
$200.00
SMC MXS8-50 Pneumatic Cylinder Slide
Like New
Check BMI Stock for More Items
***71680***
-
$200.00
SMC MXS16-100 Pneumatic Cylinder Slide
Like New
Check BMI Stock for More Items
***71673***
-
$90.00
Faulhaber DC-MIcromotor 220293
Good Condition
Check BMI Stock for More Items
***68109***
-
$1,200.00
Newport PM80037 Linear
Stage. 8″ Travel, 11 1/2″ X
3 3/4″ platform. 1/4-20 1″
O.C. Threaded Holes. We
have a large inventory of
optical stages and
Good Condition
Check BMI Stock for More Items
***65133***
accessories. R&D, lab,
instructional work?
Always keep us in mind.
-
$2,500.00
Aerotech ART330-G108 Motorized Rotary Stage w/ BM250 series motor
product actual dims are 19″ x 12 1/4″ x 6″ (L x W x H) and
actual weight is 45 lbs
rotary disc is 12 ” across
***64088***
-
$695.00
Klinger UR80 360� Motorized Rotary/Rotation Stage.
***MPN UR80
***OEM Klinger Scientific
***SKU*** 15901
-
$499.00
Cambridge Technology Galvo System Mirror Assembly using 6230H Optical Scanners.
We cannot test this item. No controller/driver unit. “As is, final sale”. PARTS/REPAR
The unit is in good cosmetic condition. However, the larger mirror has a small chip on the reverse corner.
***MPN 6230H
***OEM Cambridge Technology
***SKU*** 32508
-
$750.00
This linear stage has a travel of 36 inches. The carriage is 158mm long and 88mm wide. The guide track profile is 58mm wide and 37mm thick. Running parallel with the guide track is a ball-screw actuated by a Bautz permanent magnet motor. End plates are approximately 7 inches wide and 3 inches tall. Overall length of the assembly including motor housing is 59.5 inches.
Information on the Type plate on the carriage includes ‘Deutsche Star Model 3700.1, Typ 0325.301.05’. There is also a date, 4 May 1992
Information on the motor includes ‘Bautz Antriebs und Steuerungstechnik Permanent Magnet Motor, Typ E 589 MGB 5000-1. The electrical cable from the motor has no connector but they are of substantial length. There is no encoder mechanism
The assembly is in excellent condition with a small trace of localized corrosion present. Motion is very smooth throughout range (lead screw turned manually).
***MPN 032.301.05
***OEM Deutsche Star
***SKU*** 23183
-
$2,900.00
This is a combination of two Kensington linear stages to form an XY stage. The lower linear is of the 8500 series, and the upper of the 6000 series of stages. The model number is 8500-6×6000-4(-). Specifications include:
� Overall height – 4.75 inches
� Travel – lower stage, 6 inches – upper stage, 4 inches
� Dimensions of moving table – approximately 7 x 4 inches
� Overall dimensions of base – 11 x 11.75 inches (less manual actuation knobs)
� Side-mounted motors, belt-driven
� Serial number – 87-103-01
� Weight – 35.7 pounds
The stage is in excellent condition. Both axes work very smoothly. It appears that the two cover plates for the belt drives are lacking, but these do not affect operation. Both stages have optical encoders installed.
Location I1 L1
Photo set 1105
***MPN 8500-6×6000-4(-)
***OEM Kensington
***SKU*** 16849
-
This is a Kensington �MODEL 02 STAGE� intended for use with large inspection microscopes. I believe this unit was removed from a KLA wafer inspection system. The stage linears are based on the familiar 8500 series stages, but the framework for the cross-roller bearings is open, and the glass scales are exposed. This was definitely meant for use in a clean-room environment.
Stage travel is 8 inches in both X and Y. There is a manual actuator knob for the Y axis (upper linear), but the actuator for the X axis is via a hex wrench. There is an 3 inch diameter stage with a built-in Z-axis motion. Range is unknown since there does not seem to be any manual actuator for the vertical motion.
The stage does not rotate. There are channels for vacuum retention of the wafer for any size up to 8 inches. The vacuum may be restricted to a particular size by exchanging the position of a small set screw in the upper stage. The stage baseplate has three leveling feet..
The apparatus is in exceptional condition. Includes EG&G Torque Systems Model MT2115-014DF DC motors on both X and Y axes. Motor for the Z axis is internal and the type could not be determined.
Location I1 L1
Photo set 106733051
***MPN 02-Stage
***OEM Kensington
***SKU*** DP619
-
$2,450.00
This table was first manufactured by N.E.A.T (New England Affiliated Technologies) which later merged with Dover Instruments. Recently, both companies are now represented by Danaher Precision Systems, making this stage of very recent manufacture. It features both small-angle theta rotation and Z-axis elevation. Z axis control is via a cam following a precision wedge. For this reason the stage must be used in a horizontal configuration.
Table diameter � 200mm
Theta rotary travel � plus / minus 4 degrees
Z-axis travel � approximately 12.5mm
Positional accuracy � 10 microns height, 0.05 degrees theta
Stage base dimensions � 7.874 x 7.874 inches
Minimum table height � 3.465 inches
Z-axis ways � four 25mm diameter non-recirculating bearing columns
Z-axis motor � VEXTA Model PH268M-E1.5B
Z-axis motor equipped with VEXTA Clean Damper Model D6CL-6.3 OY8
Stage serial number � 42260
Pitch and yaw � 15 arc-seconds
Payload � 10 kg
Additional information may be found at the following links (the first link covers the standard Z-axis stage, and the second link gives more particulars on the special �theta-version�):
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=61
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=62
The table is in new condition but is sold without the four connection cables (one cable for each axis motor, and one cable for each pair of axis limit sensors). Each pair of axis cables terminates in a single connector. If you need cable sets, please refer to our other listings. We also have suitable four-axis controllers available. (See our �other recommendations� to the left of this column for cables and controller references).
***MPN Z-Theta
***OEM Danaher Precision Systems
***SKU*** DP616
-
$2,380.00
This table was first manufactured by N.E.A.T (New England Affiliated Technologies) which later merged with Dover Instruments. Recently, both companies are now represented by Danaher Precision Systems, making this stage of very recent manufacture. It features both small-angle theta rotation and Z-axis elevation. Z axis control is via a cam following a precision wedge. For this reason the stage must be used in a horizontal configuration.
Table diameter � 200mm
Theta rotary travel � plus / minus 4 degrees
Z-axis travel � approximately 12.5mm
Positional accuracy � 10 microns height, 0.05 degrees theta
Stage base dimensions � 7.874 x 7.874 inches
Minimum table height � 3.465 inches
Z-axis ways � four 25mm diameter non-recirculating bearing columns
Z-axis motor � VEXTA Model PH268M-E1.5B
Z-axis motor equipped with VEXTA Clean Damper Model D6CL-6.3 OY8
Stage serial number � 38232
Pitch and yaw � 15 arc-seconds
Payload � 10 kg
Additional information may be found at the following links (the first link covers the standard Z-axis stage, and the second link gives more particulars on the special �theta-version�):
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=61
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=62
The table is in superb condition but is sold without the four connection cables (one cable for each axis motor, and one cable for each pair of axis limit sensors). Each pair of axis cables terminates in a single connector. If you need cable sets, please refer to our other listings. We also have suitable four-axis controllers available. (See our �other recommendations� to the left of this column for cables and controllers).
Location H3 R4
Photo set 1063
***MPN Z-Theta
***OEM Danaher Precision Systems
***SKU*** DP615
-
$595.00
This is an extended linear motion air bearing stage manufactured by Dover Instrument Corporation of Westboro, MA. It will accept standard NEMA 23 mount motors. Stage includes special 0.500 inch thick sub-base plate.
Stage travel � 8 inches
Stage table dimensions � 4.375 by 4 inches
Table height � 2.875 inches above base
Stage base dimensions � 5 by 13.750 inches
Granite bearing � 2.484 x 1.238 inches in cross-section, 13.75 inches long
Leadscrew diameter and pitch � 0.500 x 0.100 inches
Stage weight � 12.35 pounds (without motor)
Serial number 4351
The stage is in excellent cosmetic condition but we have no way to test. There are some minor discolorations in the granite bearing block. Stage should have air supply before leadscrew is rotated to prevent possible damage to bearing surfaces
Location H3 R1
Photo set 1053
***MPN
***OEM Dover Instrument
***SKU*** DP605
-
$595.00
This is an extended linear motion air bearing stage manufactured by Dover Instrument Corporation of Westboro, MA. It will accept standard NEMA 23 mount motors. Stage includes special 0.50 inch thick sub-base plate.
Stage travel � 8 inches
Stage table dimensions � 4.375 by 4 inches
Table height � 2.875 inches above base
Stage base dimensions � 5 by 13.750 inches
Granite bearing � 2.484 x 1.238 inches in cross-section, 13.75 inches long
Leadscrew diameter and pitch � 0.500 x 0.100 inches
Stage weight � 12.35 pounds (without motor)
Serial number 5518
The stage is in excellent cosmetic condition but we have no way to test. Stage should have air supply before leadscrew is rotated to prevent possible damage to bearing surfaces
Location H3 R1
Photo set 1052
***MPN
***OEM Dover Instrument
***SKU*** DP604
-
$2,075.00
This is a Kensington linear motorized stage with 10 inches of motion. It uses cross-roller bearings for very large load bearing (multiple stages are easily stacked).
Stage base dimensions � 8.625 inches wide and 14.75 inches long.
Platform height (above base) � 2.845 inches
Platform dimensions � 5.70 inches wide and 14.75 inches long
Serial number � 86-209-01
Motor has brake option
EG&G PM Field DC Servo Motor � MT2115-014DF
Weight � 35.5 pounds
Stage is in near-flawless condition although it has not been tested with a driver. Manual control is would be possible using external control knob, however the brake is currently in the locked position.
Location H3 R1
Photo set 1051
***MPN 8500-10
***OEM Kensington
***SKU*** DP603
-
$380.00
This Media Logic Inc. stage has massive THK cross-roller bearings and therefore should have great load-bearing capacity. The stage has a travel of 4 inches. The side-mounted leadscrew drive is a space-saving feature.
Stage base dimensions (not including motor) � 8 inches by 9 inches
Stage platform dimensions � 8 inches by 6 inches
Stage height � 2.75 inches
Leadscrew � 0.10 inch pitch by 0.5 inches diameter
Limit Switches � 9-pin D connector for OPTOs
Drive motor � Parker / Compumotor type LE57-51
The stage is in excellent condition and includes rather long motor connection cable. The motor has an extended shaft with a knob for manual actuation.
***MPN Model 1100
***OEM Media Logic
***SKU*** DP596
-
$2,475.00
This table was first manufactured by N.E.A.T (New England Affiliated Technologies) which later merged with Dover Instruments. Recently, both companies are now represented by Danaher Precision Systems, making this stage of very recent manufacture. It features both small-angle theta rotation and Z-axis elevation. Z axis control is via a cam following a precision wedge. For this reason the stage must be used in a horizontal configuration.
Table diameter � 200mm
Theta rotary travel � plus / minus 4 degrees
Z-axis travel � approximately 12.5mm
Positional accuracy � 10 microns height, 0.05 degrees theta
Stage base dimensions � 7.874 x 7.874 inches
Minimum table height � 3.465 inches
Z-axis ways � four 25mm diameter non-recirculating bearing columns
Z-axis motor � VEXTA Model PH268M-E1.5B
Z-axis motor equipped with VEXTA Clean Damper Model D6CL-6.3 OY8
Stage serial number � 38231
Pitch and yaw � 15 arc-seconds
Payload � 10 kg
Serial number � 38613
Additional information may be found at the following links (the first link covers the standard Z-axis stage, and the second link gives more particulars on the special �theta-version�):
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=61
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=62
The table is in superb condition and includes two of the four connection cables (one cable for the Z-axis motor, and one cable for each axis limit sensors). The pair of axis cables terminates in a single connector. It does not include the cables for the theta rotation � they will need to be sourced separately.
Location H3 R3
Photo set 1042
***MPN Z-Theta
***OEM Danaher Precision Systems
***SKU*** DP594
-
$2,600.00
This table was first manufactured by N.E.A.T (New England Affiliated Technologies) which later merged with Dover Instruments. Recently, both companies are now represented by Danaher Precision Systems, making this stage of very recent manufacture. It features both small-angle theta rotation and Z-axis elevation. Z axis control is via a cam following a precision wedge. For this reason the stage must be used in a horizontal configuration.
Table diameter � 200mm
Theta rotary travel � plus / minus 4 degrees
Z-axis travel � approximately 12.5mm
Positional accuracy � 10 microns height, 0.05 degrees theta
Stage base dimensions � 7.874 x 7.874 inches
Minimum table height � 3.465 inches
Z-axis ways � four 25mm diameter non-recirculating bearing columns
Z-axis motor � VEXTA Model PH268M-E1.5B
Z-axis motor equipped with VEXTA Clean Damper Model D6CL-6.3 OY8
Stage serial number � 38231
Pitch and yaw � 15 arc-seconds
Payload � 10 kg
Serial number � 38231
Additional information may be found at the following links (the first link covers the standard Z-axis stage, and the second link gives more particulars on the special �theta-version�):
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=61
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=62
The table is in superb condition and includes all four connection cables (one cable for each axis motor, and one cable for each axis limit sensors). Each pair of axis cables terminates in a single connector.
Location H3 R3
Photo set 1041
***MPN Z-Theta
***OEM Danaher Precision Systems
***SKU*** DP593
-
$200.00
This is a Kensington riser plate suitable for use with their 10-inch travel 8500 series stages.
Length � 14.75 inches
Width � 7 inches
Height � 1.5 inches
Material � black hardcoat Aluminum
The riser is center-relieved on both sides by approximately 0.20 inches. Width of relief channel is 3.995 inches. Condition is excellent.
***MPN
***OEM Kensington
***SKU*** DP592