HP 10702A Linear Interferometer RA Opt.
$650.00
HP 10702A Linear Interferometer RA Opt.
This item appears to be an HP 10702A Linear Interferometer in which all the labels have been removed. The optical layout of the interferometer body has been scribed in the side of the case recess where the original label would have been. The interferometer consists of a polarizing beam-splitter with three additional components added. Opposite the entry face is a plane-mirror (HP 10724A), and on opposite sides an HP 10703A retroreflector and an HP 10722A converter window. This is essentially the same interferometer as the normal Linear Interferometer, however the retroreflector has been moved opposite the window so the interferometer acts at right-angles to the laser instead of straight ahead.
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a large leveling base (HP 10711A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams.
These components have been removed from various fixtures. They have been classified as second quality because of the missing labels as well as the rather crudely scribed schematics. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear in very fine condition, although not new. Unlike new components, no hardware is included.
Location W7-A
Photo set 503.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN HP 10702A, opt. 001
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP071
1 in stock
Description
Description
HP 10702A Linear Interferometer RA Opt.
This item appears to be an HP 10702A Linear Interferometer in which all the labels have been removed. The optical layout of the interferometer body has been scribed in the side of the case recess where the original label would have been. The interferometer consists of a polarizing beam-splitter with three additional components added. Opposite the entry face is a plane-mirror (HP 10724A), and on opposite sides an HP 10703A retroreflector and an HP 10722A converter window. This is essentially the same interferometer as the normal Linear Interferometer, however the retroreflector has been moved opposite the window so the interferometer acts at right-angles to the laser instead of straight ahead.
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a large leveling base (HP 10711A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams.
These components have been removed from various fixtures. They have been classified as second quality because of the missing labels as well as the rather crudely scribed schematics. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear in very fine condition, although not new. Unlike new components, no hardware is included.
Location W7-A
Photo set 503.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN HP 10702A, opt. 001
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP071
Additional information
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 5 × 3 × 3 in |
