Boom Stand with 86.2mm Focus Yoke, Rack &


Out of stock

Ask a product question
SKU 30015
Weight 50 lbs
Dimensions 16 × 28 × 24 in
Location 06022
Tested Sold AS IS. As Described
Cosmetic Condition 4 - Excellent
Product Condition Used
Container Box
OEM Name Custom Cable Industries

This boom stand is very nicely made and in exceptionally clean condition (looks almost unused). The cast base is 10 inches square and approximately 1.625 inches thick. The vertical column is 19.375 inches tall and 1.492 inches in diameter. There is a clamping support ring that supports the crossbar clamping block. The horizontal boom is 18.5 inches long with 15 inches of travel. Diameter of the boom was measured at 1.490 inches. The end of the boom has a parallel post of smaller dimensions that is adjustable over a range of 1.25 inches via a rack & pinion. This post carries a knuckle joint with an adjustable 29.93mm diameter post. The post is approximately 120mm long and has a keeper nut.

Also included with the boom stand is a focus drive with a rack & pinion travel of better than 2.5 inches. The center-to-center distance from the pin bore to the support ring is 140mm. Although not shown in the photo, the support ring does include the clamping screw.

Photo set 1805
***OEM Custom
***SKU*** 30015

SKU: 30015 Category: